Sleeves

We offer sleeves for all types of applications, both parallel and conical. Our selection includes rubbercovered sleeves, hard sleeves for platemounting, compressible sleeves for thin plates and Twinlock sleeves: compressible sleeves with an adhesive surface for platemounting. Our own brands are called Miller Pro Mount Sleeve and Miller Pro Mount Plus Sleeve.

Miller Pro Mount Sleeve is a hard robust sleeve for conventional plate mounting, suitable for all plate and adhesive tape thicknesses.

• Light weight
• Good cut resistance
• Solvent resistant outer surface layer
• Available in thickness from 1 mm to 100 mm
• Possible to cover up to 600 mm repeat length/air cylinder.
• Precision grinding (TIR ≤ 0,025 mm, diameter 0,020 mm)
• Can be used with all mounting tapes
• Available with compressible surface and also in electricity conducting material

Miller Pro Mount Plus Sleeve is a plate mounting sleeve with a compressible layer that can be applied to Miller Pro Mount Sleeves.Exclusive compressible polyurethane surface with closed cell structure for optimal print result. Developed for use with thin plate technology to minimize dot gain and to obtain the highest print quality.

True volume compressibility

• Available in three different degrees of hardness - soft, medium and firm
• Excells in combination with thin plates 0,76; 1,14; 1,70 mm
• Available in thickness from 3 mm to 100 mm
• Precision grinding (TIR ≤ 0,025 mm)
• Available in electrically conducting material

» Read more about it in our brochure.